Theses/Dissertations from 2022
In-Situ Tribology of Engineered Surfaces with 3D-Printed Micro/Nano-Textures, Mahyar Afshar Mohajer
Understanding Thermal Comfort Impact and Air Movement Around Open Stairs Through the Use of CFD Modeling, Ethan Davidson
Data-Driven Research On Engineering Design Thinking And Behaviors In Computer-Aided Systems Design: Analysis, Modeling, And Prediction, Molla Hafizur Rahman
Interfacial Engineering of Nickel-Rich Layered Oxide Cathodes via Atomic Layer Deposition (ALD), Xin Wang
Theses/Dissertations from 2021
Development of Novel Battery Materials for Lithium-Ion Batteries and Beyond, Jiyu Cai
Thermometry via Diffusion in Ferrous Core-Shell Nanoparticles for Induction Heating Applications, Hayden Carlton
Phase-Field Modeling of the Polymer Membrane Formation Process for Micro- and Ultra-Filtration, Michael Rosario Cervellere
Tribological Studies of Thick Polytetrafluoroethylene Coatings Enhanced by Polydopamine and Nanoparticles, Sujan Kumar Ghosh
Deep Learning Strategies for Pool Boiling Heat Flux Prediction Using Image Sequences, Connor Heo
Mission Profile Effects on Automotive Drivetrain Electronics Reliability: Modeling and Mitigation, Bakhtiyar Mohammad Nafis
Combined Stressors in Reliability Failure Modes in Flip-Chip Electronic Packaging, Mahsa Montazeri
Respiratory Compensated Robot for Liver Cancer Treatment: Design, Fabrication, and Benchtop Characterization, Mishek Jair Musa
An Investigation of Testing Parameters on the Frictional Properties of Patterned Core-shell Nanostructures, Colin Phelan
Material Detection with Thermal Imaging and Computer Vision: Potentials and Limitations, Jared Poe
Computational Frameworks for Multi-Robot Cooperative 3D Printing and Planning, Laxmi Prasad Poudel
Nonmetallic Jet Impingement Thermal Management for Power Electronics via Additive Manufacturing, Reece Whitt
Influence of Extracellular Matrix Stiffness and Topography on Neuronal Cell Behavior and Neurite Outgrowth, Mohan Yasodharababu
Theses/Dissertations from 2020
Adhesion and Deformation Mechanisms of Polydopamine and Polytetrafluoroethylene: A Multiscale Computational Study, Matthew Brownell
Design, Fabrication, and Reliability Effects of Additively Manufactured First Level Compliant Interconnects for Microelectronics Application, Tumininu David Olatunji
Mechanical and Frictional Behavior of Textured and non-Textured Surfaces, Raghuram R. Santhapuram
The Varied Thermal Response of Magnetic Iron-Oxide Nanoparticles During Induction Heating in Liquid and Solid-Liquid Phase Change Mediums, Joshua Tompkins
Theses/Dissertations from 2019
The Role of Inter-Particle Behavior in Iron Oxide Nanoparticle Induction Heating, Hayden Seth Carlton
Motor Control Systems Analysis, Design, and Optimization Strategies for a Lightweight Excavation Robot, Austin Jerold Crawford
Fault Adaptive Workload Allocation for Complex Manufacturing Systems, Charlie B. DeStefano
Predicting the Mechanical Properties of Nanocomposites Reinforced with 1-D, 2-D and 3-D Nanomaterials, Scott Edward Muller
Microextrusion 3D Printing of Optical Waveguides and Microheaters, Edidiong Nseowo Udofia
Theses/Dissertations from 2018
A Generative Statistical Approach for Data Classification in a Biologically Inspired Design Tool, Marvin Manuel Arroyo Rujano
The Effect of Incorporating End-User Customization into Additive Manufacturing Designs, Jonathan D. Ashley
Towards Environmentally Sustainable and Cost-Effective Food Distribution in the U.S., Jasmina Burek
Mesoscale Computational Studies of Thin-film Bijels, Joseph M. Carmack
A Numerical Investigation of Bio-inspired Scaffolds and Surface Textures, Yucong Gu
Microheater Array Powder Sintering (MAPS) for Printing Flexible Electronics, Nicholas Holt
Fluid Phase Separation via Nanochannel Array, John Lee
Development of a Rapid Fatigue Life Testing Method for Reliability Assessment of Flip-Chip Solder Interconnects, Cody Jackson Marbut
Interfacial Tailoring of Lithium-ion Batteries by Atomic/Molecular Layer Deposition, Qian Sun
Effects of Surface-Directed Spinodal Decomposition on Binary Thin-Film Morphology, Michael Brian Wise
Theses/Dissertations from 2017
Exploring Energy, Comfort, and Building Health Impacts of Deep Setback and Normal Occupancy Smart Thermostat Implementation, Zachary Ethan Alderman
3D Printed PCU/UHMWPE Polymeric Blends for Artificial Knee Meniscus, Raissa Araujo Borges
Developing Methods of Obtaining Quality Failure Information from Complex Systems, Oladapo Olalekan Bello
Numerical Simulation of Metallic Uranium Sintering, Bruce Berry
Deformation Behavior of Al/a-Si Core-shell Nanostructures, Robert Andrew Fleming
Feasibility of Using Oxide Thickness Measurements for Predicting Crack Growth Rates in P91 Steel Components, Ralph Edward Huneycutt IV
A Spreadsheet Algorithm for Determining the Economic Feasibility of Micro-CHP Systems in the Arkansas Manufacturing Sector, Ford R. Lewallen
Characterization of Plastic Deformation Evolution in Single Crystal and Nanocrystalline Cu During Shock by Atomistic Simulations, Mehrdad Mirzaei Sichani
Computer Simulation of Pore Migration Due to Temperature Gradients in Nuclear Oxide Fuel, Ian Wayne Vance
Theses/Dissertations from 2016
4D Printing Dielectric Elastomer Actuator Based Soft Robots, Jiyu Cai
Selective Resistive Sintering: A Novel Additive Manufacturing Process, Austin Bryan Van Horn
Theses/Dissertations from 2015
Modeling Radiation Heat Transfer for Building’s Cooling and Heating Loads: Considering the Role of Clear, Cloudy, and Dusty Conditions in Hot and Dry Climates, Salem Ahmed Algarni
Traction-Separation Relationships for Hydrogen-Induced Grain Boundary Embrittlement in Nickel via Molecular Dynamics Simulations, Wesley Allen Barrows
Improved Methods for Identifying, Applying, and Verifying Industrial Energy Efficiency Measures, Andrew Chase Harding
Development of a Design Tool for Biologically Inspired Fault Adaptive Design by Strategy Mapping, Nicholas Steven Huisman
Swelling-Etching Characterization of Copper (I) Oxide - PDMS for the Development of Micro/Nano - Particles Composite MEMS Corrosion Sensor, Abdoul Kader Maiga
Design, Fabrication, and Testing of a 3D Printer Based Microfluidic System, Carlton A. McMullen
Characterization of Nano-Porous Si-Cu Composites to Enhance Lubricant Retention Impacting the Tribological Properties of Sliding Surfaces, Julius Sheldon Morehead
Theses/Dissertations from 2014
Atomistic Simulation and Virtual Diffraction Characterization of Alumina Interfaces: Evaluating Structure and Stability for Predictive Physical Vapor Deposition Models, Shawn Patrick Coleman
Phase Transformation in Monolayer Molybdenum Disulphide with and without Defects under Tension Predicted by Atomistic Simulations, Khanh Quoc Dang
Utilizing Failure Information for Mission Assessment and Optimization for Complex Systems, Charlie DeStefano
Theses/Dissertations from 2013
Friction and Wear of Polytetrafluoroethylene/Graphene Oxide Composite Thin Films, Justin Kyle Carter
Creep, Fatigue and Creep-Fatigue Interactions in Modified 9% Cr - 1% Mo (P91) Steels, Valliappa Kalyanasundaram
Crack Growth Behavior Under Creep-Fatigue Conditions Using Compact and Double Edge Notch Tension-Compression Specimens, Santosh B. Narasimha Chary
Development of a PDMS Based Micro Total Analysis System for Rapid Biomolecule Detection, Balaji Srinivasan Venkatesh
Theses/Dissertations from 2012
Computer Modeling of the Influence of Structure Plan Areas on Tornado Forces, Nashmi Hassan M Alrasheedi
Design of Orbital Maneuvers with Aeroassisted Cubesatellites, Stephanie Clark
Design, Fabrication, Testing of CNT Based ISFET and Characterization of Nano/Bio Materials Using AFM, Zhuxin Dong
Design and Implementation of a Small Electric Motor Dynamometer for Mechanical Engineering Undergraduate Laboratory, Aaron Farley
Silica Nanoparticle-Based Coatings with Superhydrophilic and Superhydrophobic Properties, Robert Andrew Fleming
Distribution Map of Multi-Walled Carbon Nanotubes in a Refrigerant/Oil Mixture Within a 2.5 Ton Unitary Air-Conditioner, Warren Russell Long
Development of MEMS-based Corrosion Sensor, Feng Pan
Cross-Linked PDMS Expansion Due to Submersion in Liquid and Supercritical CO2, Teng Yang
Theses/Dissertations from 2011
Surface Wetting and Friction Studies of Nano-Engineered Surfaces on Copper Substrate, Julius Sheldon Morehead