Document Type

Article

Publication Date

7-15-2025

Keywords

Wind tunnel modeling, Dense gas release, Jack Rabbit II, Particle image velocimetry, Dividing streamline

Abstract

The Jack Rabbit II (JR-II) Mock Urban Environment field test was reproduced in a 1:50 scale physical model in the wind tunnel at the Chemical Hazards Research Center of the University of Arkansas. The agreement of the approaching wind characteristics between field test and model was verified using 3D Laser Doppler Velocimetry (LDV). 2D Particle Image Velocimetry (PIV) tests were conducted in the model to obtain velocity measurements in the MUE. Velocity measurements taken before and during a simulated chlorine release were compared. PIV results show the general flow complexity in the last rows of the MUE and the impact of the release in two different wind conditions from JR-II. Simulations of neutrally buoyant releases conducted in one set of wind conditions showed that the impact on the release was mostly a result of the added density of the chlorine simulant and not from the added velocity of the gas release. Changes in the dividing streamline at CONEX 11.4 and in the vorticity around the model building were also observed, especially for lower atmospheric wind speed (momentum). PIV results show the impact of the release in two different perspectives, from the side and from above the MUE. Physical (wind tunnel) modeling can supplement the information available from field tests to provide validation data sets for computational models, and such exercises can even be more valuable for computational model validation because the initial conditions in wind tunnel tests are generally better understood than in field tests.

Comments

Web of Science

Elsevier

Download

Share

COinS