Date of Graduation
5-2009
Document Type
Thesis
Degree Name
Bachelor of Science in Chemical Engineering
Degree Level
Undergraduate
Department
Chemical Engineering
Advisor/Mentor
Not available
Abstract
The overarching purpose of Phase I was to test, at the bench scale, a continuous supercritical methanol reactor, and to determine the feasibility of implementing the technology at full scale. Specific objectives in reaching this purpose included:
Objective 1: Choose a viable feedstock
Objective 2: Perform experiments for oil extraction
Objective 3: Design, build and operate a continuous supercritical methanol reactor
Objective 4: Design and simulate full scale biodiesel facility
Objective 4a: Perform life-cycle and economic analysis on full scale design
Objective 5: Prepare a Phase II P3 project to demonstrate the entire biodiesel process
Project Scope: The students performed extensive review of the literature regarding both feedstock selection and alternate conversion technologies. After the system was designed and constructed, the students performed all experiments in the laboratory.
Citation
Magie, M. (2009). A robust process for biodiesel production using supercritical methanol. Chemical Engineering Undergraduate Honors Theses Retrieved from https://scholarworks.uark.edu/cheguht/21
