Document Type
Article
Publication Date
11-3-2025
Keywords
Inkjet printing, Waveform optimization, Equivalent printing speed, DOD
Abstract
Inkjet printing has been extensively employed across various industrial applications due to its capability to produce high-resolution outputs and accommodate a diverse range of materials. However, its printing speed (volumetric printing rate or volumetric productivity) has remained a bottleneck for large-scale manufacturing. This study introduces a new strategy aimed at enhancing the speed of piezoelectric inkjet printing by optimizing waveform parameters. Expanding on our prior work, which analyzed the relationship between driving signal parameters and key factors like droplet volume and jetting frequency, we now focus on optimizing these parameters to maximize printing speed. To establish a fair comparison across different setups, an equivalent printing speed metric was first defined, normalizing for configuration differences such as nozzle size. Using this metric, a benchmark driving signal was designed to achieve the equivalent printing speed of a selected commercial printhead under comparable conditions. The benchmark driving signal was then optimized to enhance printing performance, and the results were validated experimentally with a custom-built setup equipped with a high-speed camera for real-time droplet formation analysis. Our findings demonstrate that the optimized signal achieves successful jetting and improves printing speed, showing up to a five-fold increase compared to the benchmark signal in our experimental setup.
Citation
Sui, C., Zhou, W. Optimizing driving waveforms to enhance inkjet printing speed. Sci Rep 15, 38358 (2025). https://doi.org/10.1038/s41598-025-22254-1
Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License
Comments
Web of Science